1. Product characteristics

Nonionic polyacrylamide is a high polymer with the high molecular weight and the low ion exponent, which has the function of flocculation, dispersal, thickening, bonding, film forming, gelating and colloidal stability. It’s flocculation is hardly influenced by the PH value and the salt, and in the process of acid wastewater treatment, its practical effect is superior to the anionic polymer.

2. Quality index

pearance

Solid content

Molecular weight

Hydrolysis

PH value

Monomer Residual

White grain

≥89 %

5-11 million

≤5 %

1-8

≤0.05 %

3. Application

1) Coal washing: It can be used for the centrifugal separation of the coal washing tailing, used in the sediment and the filtration processes of the coal dust and the coal slurry. It can help to improve the recovery rate of the coal dust and the filtration rate.

2) Textile additives: By adding some other chemicals, it can be made into a kind of chemical sizing agent which can be used for the starching of the textiles. It can improve the textile’s adhesiveness , permeability and the desizing performance, so as to make the textiles obtain the anti-static property, reduce the sizing rate, reduce the starch spots and the cloth end breakage rate and litter etc.

3) Sewage treatment: if the sewage system is acidic, it is better to choose the non-ionic series polyacrylamide. With the inorganic flocculant poly-alnminum or aluminum sulfate, it will get better effect in the water treatment.

4) Metallurgy and mineral processing: It can be used in the application such as the zinc, manganese and copper mine’s flotation and smelting etc. PAM can be added into the leakage and the residue to improve its separating efficiency.

5) Sand proof and stabilization: Dissolve the non-ionic polyacrylamide into 0.3% concentration solution, add in crosslinking agent, spray this mixture over the desert, it can retaiin and stabilize the sand.

6) Chemical grouting agent: Mixed the dissolved 95% non-ionic polyacrylamide together with 5% NN-A methylene diacrylamide, it can be used as chemical grouting agents for the water blocking of the dams, the foundations tunnels and so on.

7) Oilfield blocking agent: To be used together with the lignocellulose by adding certain chemical additives, it can be used as the oilfield blocking agent.

8) Soil water absorbent agent: It Can be used as the water absorbent agent for the soil water conservation and the sand stabilization, for seeding grass and planting trees on slopes and sand dust proof.

4. Instruction for use

(1) Commonly mix the product to 0.05% - 0.5% (w/w) solution as reserve.

(2) Disperse this product evenly, and stir to dissolve.

(3) Low-hardness water for use, avoid adopting such metal materials to influence on water quality in the dissolving tank and pool.

(4) Improve the water temperature to accelerate the dissolving velocity .but not exceed 50°C.

(5) Adjust the optimum dosage of product according to application condition.