- Oilfield Chemicals
- Water Treatment Chemicals
- Mineral Processing Chemicals
- Super Absorbent Polymer
- Product List
Flocculant / nonionic flocculant(polyacrylamide)used for mineral processing and wastewater treatment
4. Instruction for use
(1) Commonly mix the product to 0.05% - 0.5% (w/w) solution as reserve.
(2) Disperse this product evenly, and stir to dissolve.
(3) Low-hardness water for use, avoid adopting such metal materials to influence on water quality in the
dissolving tank and pool.
(4) Improve the water temperature to accelerate the dissolving velocity .but not exceed 50℃.
(5) Adjust the optimum dosage of product according to application condition.
5. Product package
25 Kg paper plastic three-in-one compound woven bags, or according to users’ requirement; Its shelf life is
The product is moisture absorbent, thus to protect from damp and moist for conservation. It should be
stored in a dry and ventilate storehouse, and not be exposed to air and sunshine.
nonionic flocculant,Nonionic polyacrylamide,mineral processing
nonionic flocculant(polyacrylamide)used for mineral processing and wastewater treatment
You may like:
cationic polyacrylamide and anionic polyacrylamide for water treatment
Anionic polyacrylamide for industrial wastewater treatment
Flocculant and polyacrylamide used for wastewater treatment
CATIONIC FLOCCULANT IN MUNICIPAL SEWAGE TREATMENT
ANIONIC FLOCCULANT FOR INDUSTRIAL WASTEWATER TREATMENT
Cationic Polyacrylamide (PAM,Flocculant)for Papermaking Wastewater treatment