Low hydrolysis degree of anionic polyacrylamide for mineral processing

1. Product characteristics
In most mineral processes where there is a flocculant requirement for either a sedimentation or centrifugation application then a high or ultra high molecular weight product is desired. The CHINAFLOC anionic product range offers ultra high molecular weight products ensuring maximum performance and cost efficiency for sedimentation and centrifugation applications.
The extensive product range of flocculants and coagulants includes a wide range of anionic /cationic charged products, all at varying molecular weights, so that all applications in the mineral processing industry are catered for.
2. Quality index
Appearance Solid content(%) Hydrolysis degree (%) Molecular weight
(million) Residual monomer content (%) Dissolution time(hr)
RTFLOC A20** ≥89 6-45
(ADJUSTABLE) 5-25
(ADJUSTABLE) ≤0.05 ≤1
3. Application
1.Coal 2. Gold/Silver 3.Copper 4.Lead/Zinc 5.Alumina 6.Uranium 7.Iron/Steel 8.Titanium 9.Dioxide 10.Nickel 11.Sand /Gravel 12.Phosphoric acid 13. Potash processing
4. Instruction for use
(1)It\'s very important to make the efficient dispersion during using, otherwise will cause agglomerate and \"fish eyes\", dissolving time will be longer.
(2)Low-hardness water for use; avoid adopting such tank or pool, which will influence on water quality.
(3)Improve the water temperature to accelerate the dissolving velocity, but not exceed 50.
(4)Stirring will accelerate dissolving, but tough stirring will make the dispersant chain broken and degradation. Shipshape agitator with 200 - 500 rpm is the best choice.
(5)Commonly mix the product into 0.05%--0.5%(w/w)solution as reserve.
(6)Adjust the optimum dosage of product according to application condition.

5. Product package
25 Kg paper plastic three-in-one compound woven bags, or according to users requirement; Its shelf life is 2 years.

6. Attention
The product is moisture absorbent, thus to protect from damp and moist for conservation. It should be stored in a dry and ventilate storehouse, and not be exposed to air and sunshine.

Chinafloc—A leading polymer  manufacturer of China China 

Cationic polyacrylamide
•Chinafloc C0510
•Chinafloc C1312
•Chinafloc C2012
•Chinafloc C3012
•Chinafloc C4008
•Chinafloc C5008
•Chinafloc C6006
•Chinafloc C7512
•Chinafloc C8008

Anionic polyacrylamide 
•Chinafloc A2520
•Chinafloc A2525
•Chinafloc A2015
•Chinafloc A3016
•Chinafloc A3020
•Chinafloc A3027
•Chinafloc A1216
•Chinafloc A3019
•Chinafloc A3018
•Chinafloc A2818
•Chinafloc A1512
•Chinafloc A5018
•Chinafloc A1815
•Chinafloc A1512
•Chinafloc A2517
•Chinafloc A3517

Nonionic 
•Chinafloc N0510
•Chinafloc N0310
•Chinafloc N0305

Applications 
Water treatment (industrial grade and PWG)
Mineral processing 
Oil and Gas(drilling ,EOR,DRA,fracturing )
Paper making 
Construction bored pile 

Choosing Chinafloc is your best choice !

Info@chinafloc.com
www.chinafloc.com

25 Kg paper plastic three-in-one compound woven bags, or according to users� requirement; Its shelf life is 2 years.

You may like:

Anionic polyacrylamide for copper mining

What kind of polyacrylamide can be used for mineral(coal, gold, silver, copper, iron, lead and zinc) processing?

Anionic polyacrylamide used for Lead,Zinc,cooper,gold mining

what kind of polyacrylamide(flocculant) we use for coal washing?

Mineral processing chemicals of anionic polyacryamide and nonionic polyacrylamide

Anionic polyacrylamide(flocculant) for Lead and Zinc processing