Magnafloc 338 is replaced by Chinafloc A 2015

Description

Magnafloc 338 is a moderately high molecular weight anionic polyacrylamide flocculant supplied as a free flowing granular powder.

Principal uses

Magnafloc 338 has found application in a wide variety of mineral processing operations including the following:

1. Clarification of zinc pulps

2. Thickening of metal hydroxides

3. Filtration of metal hydroxides

4. Flocculation of iron ore tailings

5. Flocculation of coal tailings

Dosage depends upon the application but normally lies in the range 2 – 200 g/tonne of dry substrate.

Typical properties

Physical form White to off-white free flowing powder

Particle size 98 % < 850 μm

Bulk density Approx. 0.50 g/cm3 pH of 1 % solution at 25 °C Approx. 6.5

Application

Recommended solution concentrations:

Stock solution 0.25 – 0.5 % max.

Feed solution 0.05 – 0.2 % max

Storage & Shelf life

Magnafloc 338 is at least stable for four years from date of manufacture in its unopened original packaging stored in a cool and dry place.

Stock solution 2 – 5 days

Feed solution 1 – 3 days

Shipping & Handling

Magnafloc 504 is available in 25 kg bags and big bags.

Corrosion towards most standard materials of construction is very low. Stainless steel, fibreglass, polyethylene, polypropylene and rubberised surfaces are recommended as ideal. In some cases aluminium and galvanised surfaces can be adversely affected.

Technical service

Advice and assistance in the running of laboratory and plant tests to select the correct product and determine the best application can be provided by representatives of BASF, who are experienced in mineral processing applications.

Health & Safety

Please refer to the Safety Data Sheet for detailed information concerning product’s hazards and appropriate protective measures in the workplace.

Chinafloc A2015 is a kind of anionic flocculant with high molecular weight and very lower hydrolysis degree which mainly used for mineral processing.as our experience ,it can replace of Magnafloc 338 totally in mineral processingwith cost performance.