Anionic polyacrylamide for marble and granite muds and wastewater treatment
for marble and granite muds treatment,we normally use anionic polyacrylamdie with medium hydrolysis degree and high molecular weight
we strongly recommend our models of Chinafloc A3018 for this application.
1. Product characteristics
In most mineral processes where there is a flocculant requirement for either a sedimentation or centrifugation application then a high or ultra high molecular weight product is desired. The CHINAFLOC anionic product range offers ultra high molecular weight products ensuring maximum performance and cost efficiency for sedimentation and centrifugation applications.
The extensive product range of flocculants and coagulants includes a wide range of anionic /cationic charged products, all at varying molecular weights, so that all applications in the mineral processing industry are catered for.
|
2. Quality index
|
Appearance
|
Solid content(%)
|
Hydrolysis degree (%)
|
Molecular weight
(million)
|
Residual monomer content (%)
|
Dissolution time(hr)
|
CHINALFOC3018
|
≥89
|
30
(ADJUSTABLE)
|
18
(ADJUSTABLE)
|
≤0.05
|
≤1
|
3. Application
1.Coal 2. Gold/Silver 3.Copper 4.Lead/Zinc 5.Alumina 6.Uranium 7.Iron/Steel 8.Titanium 9.Dioxide 10.Nickel 11.Sand /Gravel 12.Phosphoric acid 13. Potash processing14.Marbal and granite muds
|
4. Instruction for use
(1)It's very important to make the efficient dispersion during using, otherwise will cause agglomerate and "fish eyes", dissolving time will be longer.
(2)Low-hardness water for use; avoid adopting such tank or pool, which will influence on water quality.
(3)Improve the water temperature to accelerate the dissolving velocity, but not exceed 50.
(4)Stirring will accelerate dissolving, but tough stirring will make the dispersant chain broken and degradation. Shipshape agitator with 200 - 500 rpm is the best choice.
(5)Commonly mix the product into 0.05%--0.5%(w/w)solution as reserve.
(6)Adjust the optimum dosage of product according to application condition.
|
5. Product package
25 Kg paper plastic three-in-one compound woven bags, or according to users’ requirement; Its shelf life is 2 years.
|
6. Attention
Anionic polyacrylamide is moisture absorbent, thus to protect from damp and moist for conservation. It should be stored in a dry and ventilate storehouse, and not be exposed to air and sunshine.
|
tag:anionic polyacrylamide,marbal and granite muds,wastewater treatment
You may like:
the main applications of polyacrylamide(flocculant,PAM)
anionic polyacrylamide for marbal and granite muds
PHPA Copolymer of anionic polyacrylamide for drilling fluid
cationic polyacrylamide used for septage wastewater treatment
cationic and anionic and nonionic polyacrylamide for effluent treatment
Superfloc N300 nonionic flocculant can be replaced by Chinafloc N0510