Anionic polyacrylamide(chinafloc a2015) used in mineral processing
1. Product characteristics
In most mineral processes where there is a flocculant requirement for either a sedimentation or centrifugation application then a high or ultra high molecular weight product is desired. The SHGHTFLOC anionic product range offers ultra high molecular weight products ensuring maximum performance and cost efficiency for sedimentation and centrifugation applications.
The extensive product range of flocculants and coagulants includes a wide range of anionic /cationic charged products, all at varying molecular weights, so that all applications in the mineral processing industry are catered for.
(1)It's very important to make the efficient dispersion during using, otherwise will cause agglomerate and "fish eyes", dissolving time will be longer.
(2)Low-hardness water for use; avoid adopting such tank or pool, which will influence on water quality.
(3)Improve the water temperature to accelerate the dissolving velocity, but not exceed 50.
(4)Stirring will accelerate dissolving, but tough stirring will make the dispersant chain broken and degradation. Shipshape agitator with 200 - 500 rpm is the best choice.
(5)Commonly mix the product into 0.05%--0.5%(w/w)solution as reserve.
(6)Adjust the optimum dosage of product according to application condition.
5. Product package
25 Kg paper plastic three-in-one compound woven bags, or according to users’ requirement; Its shelf life is 2 years.
6. Attention
The product is moisture absorbent, thus to protect from damp and moist for conservation. It should be stored in a dry and ventilate storehouse, and not be exposed to air and sunshine.
our plant
workshop
R&d
warehouse
certificate
loading
25 Kg paper plastic three-in-one compound woven bags, or according to users’ requirement; Its shelf life is 2 years.