Our Products
Product Center / Anionic polyacrylamide(flocculant)used for mineral processing
409_small.jpg) 
                    409_small.jpg) 
                    anionic polyacrylamide(flocculant)used for mineral processing
	(2).jpg)
| 1. Product characteristics 
					In most mineral processes where there is a flocculant requirement for either a sedimentation or centrifugation application then a high or ultra high molecular weight product is desired. The CHINAFLOC anionic product range offers ultra high molecular weight products ensuring maximum performance and cost efficiency for sedimentation and centrifugation applications. | |||||
| 2. Quality index | |||||
| Appearance | Solid content(%) | Hydrolysis degree (%) | Molecular weight (million) | Residual monomer content (%) | Dissolution time(hr) | 
| SHFLOC A20** | ≥89 | 6-45 (ADJUSTABLE) | 5-25 (ADJUSTABLE) | ≤0.05 | ≤1 | 
| 3. Application 1.Coal 2. Gold/Silver 3.Copper 4.Lead/Zinc 5.Alumina 6.Uranium 7.Iron/Steel 8.Titanium 9.Dioxide 10.Nickel 11.Sand /Gravel 12.Phosphoric acid 13. Potash processing | |||||
| 4. Instruction for use (1)It's very important to make the efficient dispersion during using, otherwise will cause agglomerate and "fish eyes", dissolving time will be longer. (2)Low-hardness water for use; avoid adopting such tank or pool, which will influence on water quality. (3)Improve the water temperature to accelerate the dissolving velocity, but not exceed 50. (4)Stirring will accelerate dissolving, but tough stirring will make the dispersant chain broken and degradation. Shipshape agitator with 200 - 500 rpm is the best choice. (5)Commonly mix the product into 0.05%--0.5%(w/w)solution as reserve. (6)Adjust the optimum dosage of product according to application condition. 
 | |||||
| 5. Product package 25 Kg paper plastic three-in-one compound woven bags, or according to users’ requirement; Its shelf life is 2 years. 
					  | |||||
| 6. Attention The product is moisture absorbent, thus to protect from damp and moist for conservation. It should be stored in a dry and ventilate storehouse, and not be exposed to air and sunshine. 
 | |||||
we recommend our models of Chinafloc A2520 ,Chinafloc A2015 and ChinaFloc A3016 for your choosing.
	Chinafloc—A leading polymer  manufacturer of China China 
	
	Cationic polyacrylamide
	•Chinafloc C0510
	•Chinafloc C1312
	•Chinafloc C2012
	•Chinafloc C3012
	•Chinafloc C4008
	•Chinafloc C5008
	•Chinafloc C6006
	•Chinafloc C7512
	•Chinafloc C8008
	
	Anionic polyacrylamide 
	•Chinafloc A2520
	•Chinafloc A2525
	•Chinafloc A2015
	•Chinafloc A3016
	•Chinafloc A3020
	•Chinafloc A3027
	•Chinafloc A1216
	•Chinafloc A3019
	•Chinafloc A3018
	•Chinafloc A2818
	•Chinafloc A1512
	•Chinafloc A5018
	•Chinafloc A1815
	•Chinafloc A1512
	•Chinafloc A2517
	•Chinafloc A3517
	
	Nonionic 
	•Chinafloc N0510
	•Chinafloc N0310
	•Chinafloc N0305
	
	Applications 
	Water treatment (industrial grade and PWG)
	Mineral processing 
	Oil and Gas(drilling ,EOR,DRA,fracturing )
	Paper making 
	Construction bored pile 
	
	Choosing Chinafloc is your best choice !
	
	Info@chinafloc.com
	 www.chinafloc.com
www.chinafloc.com
tag:anionic polyacrylamide,anionic flocculant,anionic pam,mineral processing
	(1).jpg)
You may like:
flocculants anionic polyacrylamide used for mineral sedimentation
anionic polyacrylamide used for mineral processing of gold/silver/copper
Good Polyacrylamide as Mineral Processing Chemical
Anionic polyacrylamide(chinafloc a2015) used in mineral processing
Acrylamide98%|acrylamide manufacturers|microbiological method acrylamide
Acrylamide(microbiology method)98%|acrylamide manufacturer|acrylamide suppliers
acrylamide manufacturer|acrylamide supplier|acryamide 98%|microbiological method


